Configuring the cluster settings
Change settings for cluster.
- Available settings may differ depending on the vehicle model and specifications.
- On the Home screen, press Setup ► Cluster.
The cluster settings screen appears.
- Configure the settings as required.
- Press
on the screen or press the [SEARCH] button on the control panel, enter a search term, and then select the item to run.
Cluster (if equipped)
Set the data to display on the instrument cluster and the guiding beep.
- Available settings may differ depending on the vehicle model and specifications.
Brightness
Set the screen brightness to adjust automatically, or manually set it to stay at a constant brightness level.
Cluster Theme Selection
Selects the theme to be used in the Cluster display.
Content Selection
Selects the contents to be shown in the cluster display.
- Wiper/Lights Display: Displays a pop-up confirming the wiper/lights selected setting.
- Traffic Signs: Displays traffic information, such as speed limits.
- Icy Road Warning: Provides a warning when roads may be icy, when the outside temperature is about 39°F (4°C) or lower.
- Blind-Spot View Monitor: Displays the Blind Spot view in the cluster when operating the turn signal switch.
Welcome Sound
Provides an audible tone when the cluster turns On or Off.
