System overview

Manual

User profile

Media

Phone

QIBLA

Phone projection

Electric vehicle

Hybrid

Plug-in Hybrid

Seat

Quiet Mode

Parking assistance screen

Settings

Appendix

Settings

Configuring the display settings

Configure the system screen settings.
  • Available settings may differ depending on the vehicle model and specifications.
  1. On the Home screen, press Settings ► Display.
The display settings screen appears.
  1. Configure the settings as required.
  • Press on the screen or press the [SEARCH] button on the control panel, enter a search term, and then select the item to run.

Brightness

Set the screen brightness to adjust automatically, or manually set it to maintain a brightness level.
Type1
Type2

Auto-brightness (if equipped)

Automatic adjustment of the screen brightness to the outside brightness.

Brightness (if equipped)

Automatic adjustment of the screen brightness to the outside brightness.
  • To reset all screen brightness settings to the default values, press Default.

Camera settings

The properties of the camera.

Display contents

The properties of the camera.
  • Extend rear camera use: The rear camera view is maintained in all gears. This view is disabled after exceeding a certain speed. (Rear view monitor-equipped vehicles only)
  • Rear view reference lines: Parking reference lines are shown in the camera's rear view display.

Display settings (if equipped)

Adjust the brightness and contrast of the view screen.
  • To initialise all camera mode settings, press Centre.

Blue light filter

Blue light filter settings, such as warmth/coolness and time of use.

Blue light filter

Configure settings for the blue light filtering.
  • Automatic: Automatic activation of the blue light filter according to surrounding brightness.
  • User-set time: Activation of the blue light filter according to the time set by the user.

Settings

Font size

Line spacing