System overview

Online manual

User profile

Media

Phone

Phone projection

Electric vehicle

Hybrid

Plug-in Hybrid

Seats

Car wash mode

Quiet Mode

Parking assistance screen

Settings

OTA update

Appendix

Settings

Configuring the Electric vehicle settings (if equipped)

You can set convenience features available for electric vehicles.
  • Available settings may differ depending on the vehicle model and specifications.
  1. On the Home screen, press Settings ► EV.
The Electric vehicle settings screen appears.
  1. Configure the settings as required.
  • Press on the screen or press [SEARCH] button on the control panel, enter a search term, and then select the item to run.

Battery conditioning

Controls the battery temperature to enhance fast charging performance.

Utility mode

Utility mode uses the high-voltage battery to power electronic devices, such as the infotainment system, climate control or interior lights, when parked for a long time or while camping. Utility mode can be activated while in EV ready status or Park (P). Driving is not possible in utility mode.
  • To deactivate utility mode, press the vehicle's START button, or start the vehicle by pressing the START button and stepping on the brake.

Smart regeneration

Automatic adjustment of the braking intensity when recuperation is set to [Auto]. These adjustments are made while the vehicle is coasting, and are based on the detected driving speed, distance to the leading vehicle, and road slope.

Audible charging info

Audible information about the charging status when the vehicle starts charging.
  • To turn off the Audible charging info, press Off.

Plug & Charge (if equipped)

With Plug & Charge enabled, the authorisation is done automatically by connecting your vehicle to a Plug & Charge capable charge point. In order to use Plug & Charge, please enable this function at the e-mobility service provider recommended by your manufacturer.

i-PEDAL (if equipped)

Accelerate, decelerate and stop using only the accelerator pedal. Use the brake pedal when necessary.
※ Pull and hold the left shift paddle to enable or disable i-PEDAL.

Settings

Font size

Line spacing