Name and function of each component
Head unit
Power (POWER PUSH) button
- When power is off, press the button briefly to turn on the power.
- When power is on, press and hold the button to turn off the power.
- When power is on, press the button briefly to turn the radio/media on or off.
Volume control button (VOL)
- Turn the button to the left or right to adjust the volume.
RESET button
Press the button to initialize the system. System reset is a feature to restore the system when an unexpected malfunction occurs. The system is forced to shut down and then restarted.
RADIO button
- Press the button to enable radio mode.
- Each time the button is pressed, the mode switches in the order of FM > AM > DMB > FM.
MEDIA button
- If a playable media component is connected, pressing the button will take you to the media screen. Pressing the button on the media screen takes you to the media selection screen.
- Press and hold the button to display the [Media] menu screen.
K (User button)
Press and hold the button to go to the [Custom Button] menu. You can assign a desired function to the button, and then press the button to use the function.
WSEEK/TRACK S button
When pressed briefly;
- FM/AM/DMB: Plays the previous or next channel.
- Media mode: Plays the previous or next file.
When pressed and held;
- FM/AM/DMB: Changes the frequency until the button is released.
- Media mode: Rewinds or fast-forwards the file.
MAP button
- Move to the map screen showing the vehicle’s current location.
- When the destination is set, the map screen starts voice guide.
NAV button
- Move to the search/route/TPEG screen.
- Press and hold the button to go to the search for destination screen.
SETUP button
- Move to the settings screen.
- Press and hold the button to go to the SW information/update screen.
FILE/TUNE button
- FM/AM: Turn to the left or right to turn down or up the frequency by one step (FM: 0.1 MHz, AM: 9 KHz)
- USB, iPod: Turn to the left or right to search for a track or file, and when the desired track or file name is displayed, press to play it.
- DMB: Turn to the left or right to search for a channel, and when the desired channel is displayed, press to play it.
Protective cover for SD card (SD card slot)
- The SD card slot is where you insert or remove an SD card. Insert the SD card into the slot for use. Insert the SD card into the slot for use.
- You can use the SD card to update the system. Open the protective cover for SD card, remove the SD card, and download the new version into the card. Insert the card into the slot, and proceed with the update process. When updating the system, all other functions are disabled.
Rear seat control keys - option
W CH S button
Search channels saved in Preset.
MUTE button
Press the button to mute or unmute the sound.
(1) button
- When power is off, press the button briefly to turn on the system.
- When power is on, press and hold the button to turn off the system.
- When power is on, press the button briefly to turn the radio/media on or off.
VOL button
- Turn the button to the left or right to adjust the volume.
MODE button
- Press the button to change the mode.
- The modes for disconnected media components are disabled.
- Press and hold to turn on or off the radio/media.
S SEEK W button
When pressed briefly;
- FM/AM/DMB: Plays the previous or next channel.
- Media mode: Plays the previous or next file.
When pressed and held;
- FM/AM/DMB: Changes the frequency until the button is released.
- Media mode: Rewinds or fast-forwards the file.
Steering wheel remote control
MODE button
- Press briefly to select FM, AM, DMB or media mode.
- Press and hold to turn on or off the radio/media. However, voice guide will operate normally in navigation mode.
i button
Press shortly activates the voice recognition mode, and press and hold activates the voice recognition.
+/- button
Adjust the button up and down to control the volume.
f button
Press the button to mute or unmute the sound. (This button functions as the pause button in some media components.)
S / W button
When pressed briefly:
- FM/AM/DMB: Plays the previous or next channel.
- Media mode: Plays the previous or next file.
When pressed and held;
- FM/AM/DMB: Changes the frequency until the button is released.
- Media mode: Rewinds or fast-forwards the file.
Bluetooth call (W) button
Z W When pressed briefly
- If bluetooth is not connected, it searches for new bluetooth devices and connects the listed devices to the vehicle.
- If bluetooth is connected,
- It switches the screen to the last bluetooth call page.
- On the call standby screen, you can press the button to enter the latest called number.
- On the dial screen, press the button to call the selected number.
- When the phone is ringing, press the button to answer the call.
Z W When pressed and held
- If bluetooth is connected, it perform a redial.
End bluetooth Call (Z) button
- Press the button to end the bluetooth hands-free call.
- If you are using voice note, you can press the button to exit the voice note.