SVM (Surround View Monitor) (If equipped)

About SVM (Surround View Monitor)

• SVM (Surround View Monitor) is an option that the customer can choose to add to the vehicle during purchase.
• This feature allows you to see the front, rear, left and right views through the four cameras installed on the vehicle.
• If you put the gear to R while the engine is running, the SVM (Surround View Monitor) automatically starts to operate.
• If you switch the gear from R to P, the SVM (Surround View Monitor) stops operating.

Operating front SVM

Start the engine, put the gear to N or D and press “Camera Switch” to start the front SVM.

1 Warning display

Displays warning icons to indicate opened driver seat/passenger seat/trunk door or folded side mirror.

2 Front camera screen

Shows the front view of the vehicle through the camera.

3 SVM side camera screen

Shows the all directions (SVM) view or left/right view according to the user’s selection.

4 (View all)

Shows the front view and all directions view (SVM) at the same time.

5 (Front view)

Shows the front view only.

6 (Front view + Front-left view)

Shows the front view and front-left view at the same time.

7 (Front view + Front-right view)

Shows the front view and front-right view at the same time.

8 (DRV)

Shows the rear view during driving.

9 (SVM Settings)

Shows the SVM settings.

,Note

If the vehicle reaches about 15km/h, the SVM gets turned off. Even if the vehicle slows down to lower than 15km/h, the SVM does not turn on again.

Operating rear SVM

Start the engine and put the gear to R to start the rear SVM.

1 Warning display

Displays warning icons to indicate opened driver seat/passenger seat/trunk door or folded side mirror.

2 Rear camera screen

Shows the rear view of the vehicle through the camera.

3 SVM side camera screen

Shows the all directions (SVM) view or left/right view according to the user’s selection.

4 (View all)

Shows the rear view and all directions view (SVM) at the same time.

5 (Rear view)

Shows the rear view only.

6 (Rear view + Rear-left view)

Shows the rear view and rear-left view at the same time.

7 (Rear view + Rear-right view)

Shows the rear view and rear-right view at the same time.

8 (SVM settings)

Shows the SVM settings.

,Note

Since the SVM camera uses a wide-angle lens to secure a wide view, there is a difference between the seeming distance on the screen and the actual distance. For safety, make sure to check the rear, left and right views before driving.

SVM settings

Press [] to move to the settings screen.

• [Display reference lines]: Enable/disable the guideline on the rear camera screen.
• [Proximity warnings]: Enable/disable warning display when the vehicle approaches a nearby object in the front or rear direction.
• [Front view mode]: Select the main display mode of the front camera.
• [Rear view mode]: Select the main display mode of the rear camera.
• [Display settings]: You can adjust the brightness/contrast/saturation.

Warning display

Driver’s door open indicator

If the driver’s door is open, the warning indicator “” (red on the left door) on the top left of the screen turns on.

Front passenger’s door open indicator

If the front passenger’s door is open, the warning indicator “” (red on the right door) on the top left of the screen turns on.

Trunk open indicator

If the trunk is open, the warning indicator “” (red on the trunk) on the top left of the screen turns on.

Folded side mirror indicator

If a side mirror is folded, the warning indicator “” (red on the side mirror) on the top left of the screen turns on.